LIBEL Biplane
LIBEL Biplane
Suitable for wingfoil - surfoil - kitefoil - supfoil - wakefoil - windfoil
Set including :
- 1 mast 75cm 100% carbon – Made in France
- 1 fuselage
- 1 connexion plate for US rails OR 1 deep tuttle box OR 1 Kf-box (can be chosen on nest step)
- 1 rear wing
- 1 front wing set
- 1 screwbox ValueBox made in France
- all the screws required
Warning, prices are out of VAT for out of European Union customers ONLY. If your are in Europe, VAT will be charged on the next step.
Concept and genesis
We had already acquired some experience and expertise in the field of multi-plane, notably with the development of a biplane adapter on our historic foil, the Horue Vini and Vini V2, released in 2015. The biplane, developed in 2018 for the Vini, was intended first for use in low winds, allowing to combine several wings and thus to multiply the surfaces and possible combinations. With a lot of interesting feedback on the product, this gave birth to a new idea in our team.
The specifications for a new foil were simple : responsive - predictable - finesse.
The biplane architecture allowed us to combine many solutions necessary to meet the specifications.
a reduced scale
maximum rigidity
an average wing area
high aspect ratio
After four months of CAD, Simulation, CFAO and testing, Libel is finally ready!
The Libel is also the first model to come from the platform of the new mast SM1 which will provide an ultra-complete range of foils for all uses, with 960 unique setup with only 1 mast!
Mast
The SM1 mast is designed to minimize drag and maximize its stiffness.
The morphing mast profile brings maximum rigidity near the head of the mast for an ultra versatile and completely predictable mast underfoot.
The bi-conical heels at each end allow you to mount the binding system suitable for any board.
Mast SM1
Length : 75cm (more length available soon)
Bi-conical connector at each end
100% prepreg carbon construction
Thickness: 16mm
Optimal stiffness and drag
Large AOA panel
Wings
Libel is designed with extreme manoeuvrability in mind. To combine extreme finesse, lightness and maneuverability, our studies and calculations led us to the design of a biplane-type foil.
The biplane allows high ratio wings in a mdium to small wingspan. This enhance the Rail To Rail and encourages making incisive trajectories.
We already offer a wide range of high and low front wings, which will expand!
The HD front wings come from our High level Departement. HD series is recommended only for experts riders.
Top Front Wing
Several areas are available for the top wing of the LIBEL biplane. The available surfaces range starts from 306cm², to 780cm².
The “T” wing range is machined from G10, providing rigidity and durability.
T.306 HD
Area : 306 cm²
Wingspan 52cm
Ratio Aspect : 8.8
Volume : 132cm³
T.515
Area : 515 cm²
Wingspan 61cm
Ratio Aspect : 7.2
Volume : 287cm³
T.620
Area : 620 cm²
Wingspan 66cm
Ratio Aspect : 7
Volume : 388cm³
T.780
Area : 780 cm²
Wingspan 76cm
Ratio Aspect : 7.4
Volume : 520cm³
Bottom Front Wing
Several areas are available for the bottom front wing of the LIBEL biplane. The available area range from 216 to 710cm².
The “L” wing range is machined from G10, providing rigidity and durability.
L.216 HD
Area : 216 cm²
Wingspan 40cm
Ratio Aspect : 7.4
Volume : 90cm³
L.310
Area : 310 cm²
Wingspan 48cm
Ratio Aspect : 7.4
Volume : 132cm³
L.460
Area : 460 cm²
Wingspan 60cm
Ratio Aspect : 7.8
Volume : 234cm³
L.560
Area : 560 cm²
Wingspan 66cm
Ratio Aspect : 7.8
Volume : 310cm³
L.710
Area : 710 cm²
Wingspan 76cm
Ratio Aspect : 8.1
Volume : 443cm³
Fuselage
The Horue Libel foil is designed to convert every rider’s movement into a trajectory. Depending on your need for responsiveness, you can choose the length of the fuselage that fit your needs.
Solid machined 6061-T6 aluminum
Hard anodizing OAD 50μm
Fuselage Short 53 WG
The Short 53 fuselage completely frees the Libel foil, allowing all the most radical maneuvers thanks to its explosive reactivity. This is THE fuselage that designer Philippe Caneri recommends on the Libel for wingfoil and surfoil.
Length : 53cm
Compatibility : wingfoil - surfoil - wakefoil - kitefoil
Fuselage Medium 60 WG
The medium 60 fuselage allows to take its marks on the Libel foil. Very playful, however, you are never surprised by his linear responsiveness which will suit intermediate levels.
Length : 60cm
Compatibility : wingfoil - surfoil - wakefoil - kitefoil
Fuselage Medium 75 WD
The medium 75 WD fuselage is the one to choose for a windfoil use with the LIBEL biplane.
Length : 75cm
Compatibility : windfoil
Fuselage Long 68 WG
The Long 68 fuselage is designed for riders coming from a very stable and locked foil in order to take their marks before moving to a shorter fuselage. With this fuselage, the Libel is stable and easy, the curves are larges and not incisive.
Length : 68cm
Compatibility : wingfoil - surfoil - wakefoil - kitefoil
Stabilizer
The Horue Libel foil is available with several stabilizers to best suit the needs of each rider. Each stabilizer has an angle adjustment system to adapt to your downforce needs.
Stab 210
The best stab for those looking for the best maneuverability possible with a very playful foil, which places itself in a curve without inertia. Perfect for Rail To Rail surfing, or radical wingfoil tricks.
Area : 210 cm²
Wingspan 38cm
Ratio Aspect : 6.9
Volume : 83cm³
Setting range : 2.10°
Stab 245
The versatile stab, easy and handy at the same time. To be chosen in power waves.
Area : 245 cm²
Wingspan 44cm
Ratio Aspect : 7.9
Volume : 88cm³
Setting range : 2.10°
Stab 300
The stab 300 is recommended for riders who are not in confidence with a maneuverable foil, for example those who used to ride a foil with less than 8 ratio aspect or with a fuselage greater than 75cm.
Area : 300 cm²
Wingspan 46cm
Ratio Aspect : 7.1
Volume : 130cm³
Setting range : 2.10°
Board Connexion
The Libel mast SM1 is available with several types of connection between the foil and the board.
Bi-conical connector
Solid machined 6061-T6 aluminum
Hard anodizing OAD 50μm
Plate for US rails
Our plate for US rail fit the current standards with a lateral distance of 90mm.
The small longitudinal distance, authorized thanks to the biplane geometry, allows a greater range of longitudinal adjustment on the US rails.
The system of screw holes through the plate keeps the nuts in place without them being able to move between two sessions. The system also allows to unlock the T-nuts without removing the plate, and therefore to adjust the longitudinal position.
Plate for US rails
Our plate GAP for US rail fit the current standards with a lateral distance of 90mm.
The 100mm offset, forward or backward, allows to adapt to US rails which would be badly placed on the board.
The system of screw holes through the plate keeps the nuts in place without them being able to move between two sessions. The system also allows to unlock the T-nuts without removing the plate, and therefore to adjust the longitudinal position.
Deep Tuttle Box
The Deep Tuttle box allows the use of thick boards and is a standard in windsurfing and wingfoil world.
Kf-Box system
The Kf-Box is a standard in kitefoil. It allows the use of medium thickness boards.